Harol TR850, Руководство по сборке

Страница: 9 / 16

- 9 - V3-10-10
Assembly instructions terrace awning TR850
For the cable run see fig. 18.
Then place the plastic U-section supplied round the spring for protection (fig. 17B).
To prevent the spring from falling out during tensioning, short pieces of clip section can be places over
the spring as a temporary measure.
Leave these pieces of clip section in place temporarily during adjustment of the blind. In this way it is
very easy to check the position of the spring and the pulleys while the blind is unrolling.
The pulleys must always stay at a sufficient distance from the runners.
Then place the caps on the runners (fig. 17A).
fig. 20: spring diagram
680 mm spring, double 1360 mm spring ,single
EXTENSION
DISTANCE BETWEENROLLERS IN M