Chapter 4 Operating the Encoder
Using SAG
© 2012 Harmonic Inc.
29
Electra 1000, Version 3.0, Rev M
3.
Enter the subnet mask using the alphanumeric keys.
TIP:
T
o enter a period, press the Shift key and press the 0/. key.
4.
When you finish, press
Enter
.
4.2.3.3
Setting the Default Gateway Address
To set the gateway address:
1.
Press the
key to navigate to
NTWK: Gateway
.
2.
Press
Enter
.
3.
Enter the default gateway using the alphanumeric keys.
TIP:
To enter a period, press the Shift key and press the 0/. key.
4.
When you finish, press
Enter
.
5.
Press
Esc
to exit the Network menu.
4.2.4
Viewing the Encoder MAC Address
You can view the encoder MAC address from the front panel.
To view the encoder MAC address:
1.
Press the
NTWK
hot key.
2.
Press the
key several times to navigate to
NTWK: Control MAC
.
The MAC address appears beneath the parameter name.
3.
Press
Esc
to exit the parameter.
4.2.5
Viewing the Encoder Serial Number
You can view the encoder serial number from the front panel.
To view the encoder serial number:
1.
Press the
STAT
hot key.
2.
Press the
key to navigate to
STAT: Serial Number
.
The serial number appears beneath the parameter name.
3.
Press
Esc
to exit the parameter.
4.3 Using
SAG
You can access the Stand-alone GUI (SAG) from any computer with network access to the
encoder using Microsoft Internet Explorer 6.0 or later. SAG uses web browser cookies to
maintain information.
Use SAG to:
Configure the encoder hardware, including the network settings, preferences, and port
properties
Configure the audio, video, VBI or Teletext, DPI, and PSI stream properties
Configure the output program and transport properties
v
v
v
