3-1 Receiving inspection
3-1
Ins
ta
lli
ng t
he
H
M
A
m
ot
or
3
Appe
3-1
Receiving inspection
Check the following items after unpacking the box.
Inspection procedure
1
Check the items thoroughly for damage sustained during transportation.
If any item is damaged, immediately contact the dealer.
2
Check if the motor is what you ordered.
The nameplate is found on the end face or the side of the HMA series motor. Check the TYPE
field on the nameplate to confirm that it is the model you have ordered. If any item is different
from what you ordered, immediately contact the dealer.
Refer to section [1-2 Model] (P1-2) in this manual for details of the model codes.
3
Check if the driver combinations are correct.
The compatible HMA series motor models are shown in the ADJUSTED FOR USE WITH field of
the nameplate on the HA-800 driver.
4
Check if the driver input voltages being input are correct.
The driver's model code is shown in the TYPE field of the driver's nameplate. The last three
digits of this model code indicate the input voltage.
100: Single-phase 100 V power supply
200: 3-phase/single-phase 200 VAC power supply
If the input voltage to be supplied is different from the voltage listed on the nameplate,
immediately contact the dealer it was purchased from.
Do not combine the driver with a motor that is not specified on the
name plate.
The characteristics of the driver have been adjusted according to the motor.
Wrong combinations of drivers and motors may cause insufficient torque or
overcurrent that may cause motor burnout, injury or fire.
Do not connect a power supply with a voltage that is not specified
on the driver's nameplate.
Connecting a power supply with an input voltage that is not specified on the
nameplate may result in damage to the driver, injury or fire.
WARNING
Содержание HMA Series
