Harmonic Drive FHA - C mini Series Скачать руководство пользователя страница 3

Страница: 3 / 68

SAFETY GUIDE

To use this actuator safely and correctly, be sure to read SAFETY GUIDE and other parts of this

document carefully and fully understand the information provided herein before using the driver.

NOTATION

Important safety information you must note is provided herein. Be sure to observe these instructions.

Indicates a potentially hazardous situation, which, if not avoided, could result

in death or serious personal injury.

Indicates a potentially hazardous situation, which, if not avoided, may result in

minor or moderate personal injury and/or damage to the equipment.

Indicates what should be performed or avoided to prevent non-operation or

malfunction of the product or negative effects on its performance or function.

LIMITATION OF APPLICATIONS

The equipment listed in this document may not be used for the applications listed below:

･

Space equipment

･

Aircraft, aeronautic equipment

･

Nuclear equipment

･

Household apparatus

･

Vacuum equipment

･

Automobile, automotive parts

･

Amusement equipment, sport equipment, game machines

･

Machine or devices acting directly on the human body

･

Instruments or devices to transport or carry people

･

Apparatus or devices used in special environments

If the above list includes your intending application for our products, please consult us.

Safety measures are essential to prevent accidents resulting

in death, injury or damage of the equipment due to

malfunction or faulty operation.

WARNING

CAUTION

Содержание FHA - C mini Series





































































Результаты поиска

Содержание FHA - C mini Series

Отзывы:

Похожие инструкции для FHA - C mini Series

Бренды по названию

Популярные бренды

Harmonic Drive FHA - C mini Series, Руководство пользователя

Результаты поиска

Содержание FHA - C mini Series

Отзывы:

Похожие инструкции для FHA - C mini Series

Бренды по названию

Популярные бренды