![background image](http://html1.mh-extra.com/html/harman/martin-mac-ultra-performance/martin-mac-ultra-performance_safety-and-installation-manual_3992097023.webp)
Service and maintenance
23
3. See Figure 15. Using a pair of flat-nosed pliers, grasp the teeth of the goboholder firmly and pull the
goboholder out of its clip in the gobo wheel.
4. For instructions on how to install a new gobo in a goboholder, see “Replacing a gobo in a goboholder” on
5. Goboholders are held in position in the gobo wheel by clips (see Figure 13 on page 22). When you
reinstall the goboholder, you must make sure that the jaws of the clip engage in the flange in the
goboholder on both sides of the goboholder.
6. Line up your reference point on the goboholder with your reference point in the effects module. Holding
the goboholder teeth with flat-nosed pliers, slide the goboholder back into the jaws of the clip in the gobo
wheel.
7. Check that the gobo is pushed fully into the clip and held securely. To check that the goboholder is
correctly installed, rotate the goboholder at least 180° in both directions in the gobo wheel and check
that it and all the other goboholders move freely.
8. If you have finished service work, reinstall the top head cover and its safety cable with reference to
“Opening the head for access” on page 20.
Figure 15: Removing a goboholder from Gobo Wheel 1
Содержание Martin MAC Ultra Performance
