Harman Martin ELP WW, Руководство пользователя, Страница: 14 / 36

14 Martin® ELP WW User Manual
Fixture setup
This section explains the fixture characteristics you can set that determine how it can be controlled
and will behave. You choose the settings using the menus available from the control panel, and
they are retained even when the fixture is powered off.
Options can also be set over the DMX link using RDM from a suitable controller, see “Setting
options by RDM” on page 18.
Only the main functions are described in this section. You can see a complete map of the control
menu structure and brief explanations of their purposes in “Control menus” on page 25.
Using the control menus
See photo on right. Use the
fixture’s control panel as follows:
•
To access the control menus,
press the MENU button.
•
Navigate the menu structure
using the ENTER, DOWN

and UP

buttons.
•
To select a menu option or to
confirm a selection, press the
ENTER button.
•
To return to a higher level in
the menu structure without
making a change, press the
MENU button.
•
To exit the control menus
completely, press and hold the
MENU button.
Control panel display
See photo on right. When you
power the fixture on it resets and
then shows the following data in
the control panel display:
•
Name of product
•
Temperature of LED module
•
DMX address currently used
•
DMX Channels currently occupied
The display flashes when the fixture is not receiving a valid DMX signal.
Fast focus mode
If you need to focus the fixture but there is nobody to operate the lighting console, you can quickly
turn the fixture on in “Fast Focus mode” using the control panel. Hold down the ENTER button for
5 seconds and the fixture will come on at full brightness for 60 seconds, allowing you to set the
focus. After 60 seconds the fixture will return to normal operation.
Setting the DMX address
Each fixture must be assigned a DMX address. The DMX address, also known as the start
channel, is the first channel used to receive instructions from a DMX controller. The fixture is
controlled using between 1 and 4 DMX channels depending on the personality set. If a fixture
using 4 channels has a DMX address of 1, then it uses channels 1 to 4 inclusive. The following
fixture in the DMX chain can then be set to a DMX address of 5.