Harman® • Accentra52i-TC Installation Manual_R8 • 2017 -___ • 01/19
7
3-90-00584i
Reciprocating Saw
Hammer
Phillips Screw driver
Tape Measure
Level
Non-Combustible Sealant
Material
Gloves
Safety Glasses
Electric Drill & Bits
May also need:
Vent Support Straps
Venting Paint
Tools and building supplies normally required
for installation, unless installing into an existing
masonry fireplace:
B. Tools And Supplies Needed
C. Inspect Appliance and Components
• Carefully remove the appliance and components from the
packaging.
• The vent system components and decorative doors and
fronts may be shipped in separate packages.
• If optional log set is purchased, the log bracket must be
installed prior to installing the log set.
• Report to your dealer any parts damaged in shipment,
particularly the condition of the glass.
•
Read all of the instructions before starting the
installation. Follow these instructions carefully during
the installation to ensure maximum safety and benefit.
Hearth & Home Technologies disclaims any responsibility
for, and the warranty will be voided by, the following
actions:
• Installation and use of any damaged appliance or vent
system component.
• Modification of the appliance or vent system.
• Installation other than as instructed by Hearth & Home
Technologies.
• Installation and/or use of any component part not
approved by Hearth & Home Technologies.
Any such action may cause a fire hazard.
Risk of Fire, Explosion or Electric Shock!
DO NOT use this appliance if any part has
been under water. Call a qualified service
technician to inspect the appliance and to
replace any part of the control system that
has been under water.
WARNING
!
WARNING
!
RISK OF FIRE OR EXPLOSION! Damaged
parts could impair safe operation. DO NOT
install damaged, incomplete or substitute
components. Keep appliance dry.
