manualshive.com logo in svg

Harman Kardon CITATION 7.0, Руководство пользователя

Поделиться
Скачать
Harman Kardon CITATION 7.0 Скачать руководство пользователя страница 49

Citation 7.0 Owner’s Manual 
Preliminary Draft  
 

 

Page # 49 

Enitre Contents Copyright ©1995 - Harman Kardon Inc. 

Three options are available for trigger (screen) control for each input: 
 
1. Manual Adjust: This is the factory default setting. When this option is selected, the decision to send the control 
signal to raise or lower a screen is the same for all inputs. The selection of “screen up” or “screen down” is made via 
the “Options Set” menu. See page #xx for more information. 
 
2: Always Up: When this option is selected, the trigger signal will not be present when the mode is selected. This 
option is useful for “audio only” sources such as tuners, audio cassette decks or phono preamps, where there is no 
need to lower a video screen during playback. Selecting this option will over-ride settings made in other menus. for the 
particular input. 
 
3. Always Down: When this option is selected, the trigger signal will be present so that the screen is always lowered 
when the specific input signal is selected. If the “Options Set” menu is set to control the screen for “Manual Up”, this 
mode should be selected for video inputs such as VCRs, LV players, satellite receivers and other sources where the 
video screen is required. This option will over-ride the settings made in other menus so that the screen is extended for 
the particular input. 
 
 
To program the trigger controls for response to input source selection, go to the “Source Edit” menu by pressing 
“Source Edit” twice. At the main edit screen, press “

Ð

“ twice so that the on screen “

Ö

“ pointer is next to “Projection 

Screen” (Figure #xx). Press “Select”.  
 
Use the “

Ð

“ and “

Ï

“ buttons to select the desired programming option, based on the descriptions shown in this 

section. When the “

Ö

“ pointer is next to the correct description, press “Select” to chose that option, and note that the 

“

„

“ cursor will move next to that choice to verify the selection. (Figure #xx). Press “Exit/OK” to enter the selection to 

the 7.0’s memory. This will return you to the “Source Edit Menu”. At this point you may continue with a Source Edit, or 
press “Exit/OK” to return to normal operation.  
 
 

Содержание CITATION 7.0



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды