19
MKIV Ocean Unit 1
Assembly Final
If stay length is set, use side cutters or
needle-nose pliers to bend cotter pin
to secure turnbuckle.
Clevis Pin
Crosspin at 90°
to Clevis Pin
Slide lower drum assembly over turnbuckle
and attach using long crosspin.
Use plastic washers provided.
WARNING! Crosspin must be
90 degrees to clevis pin that
attaches unit to boat. If pins run
same direction toggle will fatigue
and could break suddenly.
7311.20 5/8 stud/jaw toggle
Lift foils so top of foils ride about
½" (12 mm) below upper terminal.
1
/
2
" (12 mm)
