background image

5 - Operation

85

Before Returning to Refill the Sprayer

If the sprayer is to be refilled at the farm or at a fixed filling place without a filling space with hard surface and drain to a closed 
reservoir, the sprayer should be rinsed before returning to refill.

Dilute the residues of the spraying circuit, and spray it on the crop. Then rinse the sprayer on the outside with the External 
Cleaning Device before returning to the farm. 

±

WARNING! Always follow local legislation in force at any time.

Parking the Sprayer

To avoid spot contamination, the sprayer should always be parked at either the washing/filling location or under roof. 

This prevents rainfall from washing down chemical residues from the sprayer's surfaces. 

Parking at the washing/filling location will retain residues.

Always park the machine out of reach of children, animals and unauthorized persons.

Always follow local regulations when parking your sprayer.

Quick Reference - Operation

In the following diagrams handle positions for different options are described.

Содержание COMMANDER 4500











































































































































































Отзывы: