FINAL INSTALLATION
12. Attach the switch housing cover (I) to the
switch housing (H). Align holes in switch
housing cover (I) with holes on outer edge
of the switch housing (H). (Note: Make sure
the notch in the edge of the switch housing
cover (I) clears the reversing switch in the
switch cup of the fan-motor assembly (G)).
Re-insert screws and secure all screws.
13. Install bulbs (N) into sockets.
NOTE
: This fan has an energy-saving wattage
limiter included. If you replace the candelabra-
base bulbs with over 190 watts, the light will
automatically turn off. Please ensure the bulb
wattage is always below 190 watts.
H
I
12
H
N
13
FINAL INSTALLATION
14. Remove the rubber washer, hex nut, bowl
cap (L) and finial (M) from the light kit (J).
15. Place glass bowl (K) on pipe until flush
against metal disk. Thread the fan pull chain
through the side hole of the glass bowl (K),
making sure pull chain hangs clear and is
not tangled in the light kit (J) socket. Thread
light kit pull chain through the center hole of
the glass bowl (K). Place rubber washer and
hex nut removed in Step 14 onto the pipe
and tighten securely. Pass the fan pull chain
through the side hole of the bowl cap (L).
Then place the bowl cap (L) and finial (M)
over the pipe and tighten securely. Attach the
fan pull chain extension (BB) and light kit pull
chain extension (CC).
NOTE
: The side hole of the glass bowl (K),
the side hole of the bowl cap (L) and the
three-speed adjustable switch on the switch
housing (H) should be in alignment; if not, the
fan pull chain will be stuck and the fan won’t
work.
rubber washer
hex nut
L
M
J
14
*
H
K
CC
BB
M
rubber washer
hex nut
L
15
11. Connect the white wire from the light kit (J)
to the white wire from the switch housing (H).
Connect the black wire from the light kit (J)
to the blue wire from the switch housing (H).
Make sure the wire connectors are secure.
WARNING
: To avoid possible fire or shock,
the connectors should not be removed unless
a light kit will be immediately installed and
power should be turned off prior to removal of
the light kit.
blue
black
white
H
I
J
11
15
14
Hardware Used
Fan pull chain extensions
x 1
BB
Light pull chain extensions
x 1
CC
