11
10
WIRING
2. To connect wires, twist wire ends together
and screw wire with wire connectors (AA) in a
clockwise direction. Tape the wire connectors
(AA) and wires together with electrical tape (not
included). Be sure no bare wire or wire strands
are visible after making connection.
1. Remove the fan from the hook on the
mounting bracket (A). Align the locking slots
of the canopy (B) with the two screws in the
mounting bracket (A). Push up to engage
the slots and turn clockwise to lock in place.
Immediately tighten the two screws firmly.
AA
2
outlet
box
screws
hook
locking
slots
A
B
1
Place
GREEN
and
WHITE
connections on
opposite side of box from the
BLACK
and
BLUE
connections. The splices should be
turned upward and pushed carefully up into
the outlet box.
FINAL INSTALLATION
FINAL INSTALLATION
2. Install the two screws that were removed in
previous step and tighten securely.
3. Directly align the locking slots of the canopy
(B) with the two screws in the mounting
bracket (A). Push up to engage the slots and
turn clockwise to lock in place. Immediately
tighten the two screws firmly. Install the two
screws that were removed in previous step
and tighten securely.
4. Attach a blade (F) to a blade bracket (E)
using the blade screws (DD).
Repeat for remaining blade assemblies.
B
screw
outlet box
2
B
screw
outlet box
3
E
F
DD
4
Hardware Used
Blade Screw
x 16
DD
1. Connect the
BLACK
and
BLUE
wires from
the fan to the house
BLACK
wire. Connect
the
WHITE
wire from fan to the house
WHITE
wire. Connect all
GROUNDED (GREEN)
wires together from fan to the house
GREEN/
GROUND
wire.
NOTE:
BLACK
wire is hot power for fan.
BLUE
wire is hot power for light kit.
WHITE
wire is common for fan and light kit.
GREEN
wire is ground wire. If house wires are
different colors than referred to above, stop
immediately. Consult a licensed electrician to
determine proper wiring.
Hardware Used
Wire Connector
x 4
AA
If you installed the fan with “Closemount Style
Fan Mounting”, continue to Steps 1 and 2. If
you installed the fan with “Downrod Style Fan
Mounting”, skip to Step 3.
Grounded/Green
Black
White
Grounded/
Green
Black
Blue
White
outlet box
blue black white green
white
Green/
Grounded
black
Supply Circuit
speed
switch
1
You may now proceed to Step 4.
