HappyJapan HCR3, Инструкция

Страница: 37 / 253

-R3 -31
THREADING THE MACHINE
4_7 Q701
4-7
When you use the machine in QUEUE or run the machine
in individual head sewing, thread take up levers for unused
heads move and upper threads come off from thread catch
holder or thread holding spring. Therefore in order to keep
upper threads in place, put thread holding rubber against
front panel of unused heads. By doing this way, you will be
able to prevent upper threads from coming off.
• When you embroider, please be sure to take out thread
holding rubber.
• Stick removed thread holding rubbers to the machine and
keep them.
CAUTION: To prevent accidents.
Please be careful of the sharp point of
the needles when threading upper threads
through the needle.
Thread holding rubber
Thread holding
Thread holding
spring
4. Upper rectifier
5. Minor thread tension
6. Thread tension
Wind upper threads one time around rotary ten-
sion disc clock-wise.
7. Thread guide
8. Guide pin
9. Lower rectifier
10. Thread adjusting spring
11. Take-up lever
12. Thread guide
13. Lighting bracket
14. Needle bar thread guide
15. Needle
Thread from front side of needle.
Pull upper threads slowly and see that the rotary
tension disc moves smoothly by pulling the thread
downward as much as possible.
16. Pressure foot
When checking thread, pull upper threads from
needle and check if rotary tension disc moves
smoothly.
11
4
6
8
9
10
12
5
7
13
14
15
16