HappyJapan HCR3, Инструкция

Страница: 162 / 253

-RA -35
MACHINE SETTINGS
15-2
5_2 Q701
No. Display Setting
Default is underlined
Contents
19 Expand cap limit
1 ~ 10mm
0 .........
The direction of Y-axis of the embroidery area (standard) is extended in
the direction of the brim of the cap.
If the embroidery area is extended too much, there is a possibility
that a needle and pressure foot may hit a frame and may be damaged.
Before start sewing, please check carefully the embroidery area by trace
function etc..
• The embroidery area is extended with the set-up size.
• The embroidery area is not extended.
20 Frameout position 0 ~ 100
~ 330mm Set movement of frameout in the drive menu.
21 Display inch Yes
No • Display the unit of dimensions at an inch.
• Display the unit of dimensions by millimeters meter.
22 Trace speed 0 ~ 100
~ 300 You can change the Tracing speed. "100" mean the normal speed.
If you change the number bigger, the speed decrease.
23 Display off timer 1 ~ 240
(min.) The machine turns off the display screen when the time without any
operation exceeds the time entered in the parameter.
Timer function is "off" when setting value is set to "0"
24 Design disp mode All
Change • When drive mode, highlight all color change number on the LCD
Display.
• Highlight only current color change number.
25 Drawing“Real Pattern” Yes
No
Display pattern with realistic image on the screen.
26 Operation Sound Yes
No Make beep sound when button or key of touch panel is pressed.
27 Notification Sound Yes
No Make beep sound when the machine is stopped.
28 FW/BW Lock Count
(1st.) 0 ~ 100 In "Stitch number forward", when the key is pressed continuously, the
"Key lock" function is activated and the frame will move by the one stitch
continuously even the finger is released from the key.
Set number of stitches until "Key lock" function is activated.
The "Key lock" function will be disabled when the number of stitches is
set to "0".
29 FW/BW Lock Count
(10st.) 0 ~ 100 n "Stitch number forward", when the key is pressed continuously, the
"Fast forward"(10 stitches) function is activated and the frame will move
continuously even the finger is released from the key.
Set number of stitches until "Fast forward" function is activated.
The “ Fast forward” function will be disabled when the number of stitches
is set to "0".
30 Cross mark type Selection of the cross mark (pointer) type.
31 PC Keyboard Layout
Yes
No
Selection of the keyboard layout.
･ PC (QWERTY)
･ Alphabetical order