HappyJapan HCR3, Инструкция

Страница: 184 / 253

-RA -79
17. Press and press (Trace). 6-4
Press , and the embroidering frame moves
for the design trace. 1 0-4
Make sure that the pressure foot and needle do
not touch the frame.
Press
, and trace is stopped.
After tracing each design, frame movement is
stopped.
Go on to step 19 if you want to start
embroidering without tracing.
18. Select “Yes” and press to trace next
design data.
Screen of step no.17 will be shown until finishing
of trace for all registered design.
In case you want to skip tracing, press
.
19. Press .
The machine will start a Queue embroidery with
Queue operation in registered order.
After tracing each design, frame movement is
stopped.
20. According to instruction of “JUMP SETTING”
on screen, set “JUMP” on each machine
head, and press
to confirm.
21. Press .
Screen shows image of design.
22. Repeat step 19-21 till end of all design data
registered.
After finishing your last design, the display will
show “>>End” and the machine will stop.
1 7 -3e
QUEUE
18_2g Q101
>>End
Forward only when pressing
Frame move
Backward only when pressing