HappyJapan HCR3, Инструкция

Страница: 161 / 253

-R3 -30
No. Display
Setting
Default is underlined
Contents
2 Tightness
level
□
The machine adjusts thread tightness level by controlling the timing of frame
move.
By default it is set to " ".
3 TRD. break
back
1 ~ 50 (6) ...
0 .................
When thread is broken, the stitch will undo itself for the specified number of
stitch.
• The stitch undoes itself by the specified number of stitch in this setting.
• The stitch does not undo.
4 All head
mending
Yes .......
No ........
The machine mends threads only on heads with detected thread break.
The machine mends threads for all heads irrespective of thread
5 Width data
limit
1 - 13mm
(13=12.7)
When stitch length exceeds this length, the machine divides it by this jump
length and creates multiple movements. Width data limit becomes 12.7mm only
when setting value is set to 13.
Please use a smaller number when you use thick and heavy material.
6 Quick start
mode
Yes.............
No...............
If you set to "No", the machine will increase speed slowly. Please select "No."
when you have a problem with skipped stitches on the beginning stitch after
thread trim.
• The machine sews up to 3 stitches slowly after thread cut.
• The machine sews up to 5 stitches slowly after thread cut.
7 Auto thread
cut
Yes
No
This performs automatic thread cut after color change and stop.
8 Cut at jump
data
1 ~ 8 (3)......
0..................
When a set number of continuous jumps exists in pattern data, the machine
cuts threads before jumping.
• Machine trims the thread on setting number of constant jump.
• Does not trim.
9 Cut at null
jump
Yes.............
No...............
This sets thread cuts before null jumps (isolated jumps with no net movement)
• Does trim on empty jump data.
• Does not trim on empty jump data.
10 CHG. always
cut
Yes.............
No...............
Forces a trim at every color change.
• Always thread trim before color change.
• If data does not have trim function at color change point, machine does not
trim.
11 Length of
TRD.cut Max.
Long
Normal
Short
Min.
Needle........
The machine cuts upper threads to a longer length.
• The upper threads of each needle will be cut off by registered length. 15-3
12 Slow
(mend out)
Yes
No
When mending finishes and all heads start to embroider again, machine speed
to be decelerated for safety purpose.
13 Width data
all -1.0 ~ 1.0mm
0.0mm.......
This is to alter the widths of all satin stitches for all the designs in the memory.
• Adjust satin stitch width by selected amount.
• Does not adjust width.
14 TRD. break
detect
Quick 3
~
~
Norma
~
~
Slow 3
Off
Needle........
Sensitivity selection of the thread break detect sensor.
By default it is set to "Normal".
• You can set sensitivity of thread break detection needle by needle. 15-4
15 Convert cap Yes
No
When you install the cap drive frame on the machine, the machine will convert
(rotate) your design automatically.
16 Revers frame
move
Yes
No
Frame will be moved in the opposite direction of the arrow key.
17 STR.Auto
Position
Yes
No
Machine remembers & returns to last sewn position after sewing interruption
even if operator has moved the frame after interrupt.
18 Embroidery
weight
Light
Middle
Heavy
This setting for heavy duty material depends by material weight.
Normally, please select "middle" or "Heavy" for Border frame.
Machine speed is decreased automatically, when you sellect "middle " or
"heavy".
19 Expand cap
limit
1 ~ 10mm
0mm..........
The direction of Y-axis of the embroidery area (standard) is extended in the
direction of the brim of the cap.
If the embroidery area is extended too much, there is a possibility that a
needle and pressure foot may hit a frame and may be damaged.
Before start sewing, please check carefully the embroidery area by trace
function etc..
• The embroidery area is extended with the set-up size.
• The embroidery area is not extended.
20 Frameout
position
0 ~ 100
~ 780mm
Set movement of frameout in the drive menu.
21 Display inch Yes
No
• Display the unit of dimensions at an inch.
• Display the unit of dimensions by millimeters meter.
22 Trace speed
0 ~ 100 ~ 300 You can change the Tracing speed. "100" mean the normal speed.
If you change the number bigger, the speed decrease.
23 Display off
timer
0 ~ 240 (min.) The machine turns off the display screen when the time without any operation
exceeds the time entered in the parameter.
Timer function is "off" when setting value is set to "0"
24 Design disp
mode
All
Change
• When drive mode, highlight all color change number on the LCD Display.
• Highlight only current color change number.
25 Drawing
“ Real
Pattern”
Yes
No
Display pattern with realistic image on the screen.
26 Operation
Sound
Yes
No
Make beep sound when button or key of touch panel is pressed.
27 Notificati-
on Sound
Yes
No
Make beep sound when the machine is stopped.
28 FW/BW Lock
Count(1st.)
0 ~ 100 In "Stitch number forward", set number of stitches until "Key lock" function is
activated
The "Key lock" function will be disabled when the number of stitches is set to
"0".
29 FW/BW Lock
Count(10st.)
0 ~ 100
Set number of stitches until step of “ Stitch number forward” is changed from
one stitch to 10 stitches.
The “ Stitch number forward” function will be disabled when the number of
stitches is set to “ 0” .
15-1
MACHINE SETTINGS
5_1 O512
Before embroidering, check the basic settings of the machine.
The rest of the settings can be left at default values (as indicated by underline below).