Haojue XPRESS, Руководство пользователя

Страница: 36 / 101

EN
(36) Haojue XPRESS 99011H17400H000 V02 EN+FR 2020-7-1
handle and make sure there is a gap of 3–5mm before
there is an apparent resistance. If the gap is insufficient,
adjust it with the method below.
1. Remove the rubber bush
1
along the clutch cable,
loosen the nut
2
.
2. Turn the adjusting screw
3
clockwise till the end.
3. Loosen the lock nut
5
, adjust the nut
6
along
the front-back direction, operate the clutch lever and
adjust the clutch cable gap
4
to be 3–5mm.
4. Do fine adjustment through the adjusting screw
3
.
5. Firmly lock the nut
2
and
5
, and then mount the
rubber bushes
1
.
B CAUTION
It’s prohibited to intentionally increase the cable
clearance
4
.
B CAUTION
During the operation of vehicle, the friction plate
will be worn to a certain degree to reduce
the cable clearance so that the timely checking
and adjustment is required (Please refer to the
maintenance schedule for the detailed checking
period. The special attention shall be paid within
the first 1000km), otherwise it will result in clutch
slip.
B CAUTION
The excessive or insufficient cable clearance of
clutch will easily result in wear and malfunction of
clutch and gearshift mechanism. Upon detection of
abnormal cable clearance (The clearance
4
is out
of 3–5mm range), clutch slip, or weak acceleration,
adjust timely.
B CAUTION
If the cable clearance can’t be adjusted to required
value due to excessive wear of clutch frication
plate or the slip is still present after adjustment,
timely replace the friction plate, otherwise the other
clutch parts will be damaged.
CARBURETOR
Undisturbed carburetion is the basis of the performance
you ought to expect of your engine. The carburetor is pre-
set at the factory for the best carburetion. Do not attempt
to alter its setting. There are two items of adjustment,
however, under your care: engine idle speed and throttle
cable play.
(36) Haojue XPRESS 99011H17400H000 V02 EN+FR 2020-7-1
34