Hanwha Vision XRN-3210B4, Руководство пользователя

Страница: 117 / 131

English
_117
onViF setup
You can set the camera registered with the Onvif protocol.
setup > event > onViF setup
schedule
Whether to output an alarm can be scheduled according to the day and time.
The initial setting will be an event sync, and an alarm will be sent only when an event occurs.
setup > event > schedule
setting the deViCe
You can check a list of devices that are connected to the Recorder and configure the necessary settings.
For details, refer to the "
setup > setting the device " page in the Table of Contents.
storage device
You can check and change the settings related to the data storage device.
setup > device > storage device
Management
You can check a storage device, amount of use, type of use and status of storage device.
●
ARB : Video that was not recorded due to disconnection from the camera can be backed up after the
connection with the camera is re-established.
Press the button and an <
auto recovery backup (arb)
> window is opened.
For details, refer to the "
setup
>
setting the device
>
storage device
" page in the Table of Contents.
isCsi
This function is only available for products that support iSCSI.
(Refer to the "
Functions supported by Model " page.)
When connecting an iSCSI device to the recorder, you can search for the iSCSI device and connect and disconnect
it.
•
se
tu
P V
ie
W
er