Hanwha Vision SPA-S1000, Руководство пользователя

Страница: 26 / 33

use audio server
26_
use audio server
Event Registration Setting
~ NO: If you click the [ + ] icon, a list is created, and if you click the [-] icon, the list is removed.
~ IP Address: Select an IP address of the device to register.
You can register the following three event types.
~ If you select [ 127.0.0.1 ] for the IP address, the device name will be displayed as < Controller >, and the
CP can be selected from CP 1-16.
If you press the contact Closure Number in the <
Event & Preset > of < Operate >
;
< Button Mode >, an
audio source will be broadcast via the speaker set in < Broadcasting Routing > or < Local File Play >.
` Clicking a Contact Closure Number will broadcast the sound source as many times as you set in < Broadcasting
Routing >, < Local File Play > ; < Play count >.
`
If the device is registered in the <
Contact Closure Output
> setting, the Contact Closure Output signal is active
until the Contact Closure Number is turned off.
` If the Contact Closure Number is turned off while a sound source is being broadcasted, both the broadcasting and
the Contact Closure Output signal will stop.
- If you select the IP address as the speaker, the model name of the < Device Name > will be displayed
while the CP is displayed as drycontact_in_1.
If an input signal is generated from the contact Closure device connected to the speaker, the audio
source will be broadcast from the speaker set in either <
Broadcasting Routing > or < Local File Play >.
`
If the Contact Closure INPUT signal is "On", the sound source will be broadcasted as many times as you set in
<
Play count
>.
If the Contact Closure INPUT signal remains "On" after the sound source has been broadcasted for the number of
times you set, the sound source broadcasting will be restarted.
` If the device is registered in the < Contact Closure Output > setting, the Contact Closure Output signal will be
active until the Contact Closure INPUT is "Off".
` If Contact Closure INPUT is "Off" while a sound source is being broadcasted, the sound source will be
broadcasted for its full length and then stops with the Contact Closure Output signal.
- If you select the IP address as the microphone, the model name of the < Device Name > will be
displayed and the CP can be selected from button_1~5.
If you press the Contact Closure Number from among the five buttons on the left side of the
microphone and press the <
TALK > button, the sound source will be broadcasted to the speaker you
set in < Broadcasting Routing > or < Local File Play >.
Microphones can use a VP, and if you enter a VP number, the Contact Closure Number will be
disabled.
Press a VP Number mapped to a combination of 10 buttons (0 - 9) on the middle of the microphone
and press the <
TALK > button, and the sound source will be broadcasted to the speaker you set in
<Broadcasting Routing> or < Local File Play >.
` If the microphone status display shows < Talking... >, the sound source will be broadcast as many times as you set
in < Play count >.
`
If the device is registered in the < Contact Closure Output > setting, the Contact Closure Output signal will be
active until the < TALK > button is turned off.
` If the < TALK > button is turned off while a sound source is being broadcasted, both the broadcasting and the
Contact Closure Output signal will stop.
~ Device Name: Displays the name of the device automatically upon the selection of an IP address.
~ CP: Select a channel and a type of event that can occur to the device.
As a CP channel and its use are individually designed as per device, the selectable menu of each
device will automatically be displayed.
~ VP: If you select the IP address as the microphone, you can set either the CP or VP.
For the VP input value, you can directly enter a number between 1 & 9999.
~ Description: The user's description can be input.