Hanwha Techwin WISENET XRN-1610 Скачать руководство пользователя страница 75

Страница: 75 / 88

Storage device

You can check and change the settings related to the data storage device.

device/format

You can check a storage device, amount of use, type of use

and status of storage device.

•

ARB : Video that was not recorded due to disconnection from

the camera can be backed up after the connection with the

camera is re-established.

Press the button and an <

auto recovery backup

> window

is opened.

For more detailed setup, see the "

Storage device

device/

format

" page under "

menu Setup

Setting the device

" in

the Table of Contents.

iScSi

This function is only available for products that support iSCSI.

For products that support iSCSI, see “

nvr products supporting

each feature

”. (Page 4)

If you connect NVR with an iSCSI device, you can search,

connect or disconnect the iSCSI device.

raid

This function is only available for products that support RAID.

For products that support RAID, see “

nvr products

supporting each feature

”. (Page 4)

If you set the RAID mode, then even if the system HDD is

damaged, you can safely recover data.

Hdd alarm

You can set the alarm output port and the duration in case an

error occurs.

distributed recording

This function is only available for products that support

distributed recording. For products that support distributed

recording, see “

nvr products supporting each feature

”.

(Page 4)

By allocating a certain portion of HDDs to each group, you can

distribute the amount of recording for optimal saving.

monitor

You can configure the monitoring screen settings and set the

output system.

If the screen does not work properly, see “

Troubleshooting (FAQ)

”

in the Appendix.

The Monitor Setup settings control the monitor connected to the

NVR.

English

_75

●

Setup viewer

Содержание WISENET XRN-1610

























































































Результаты поиска

Содержание WISENET XRN-1610

Отзывы:

Похожие инструкции для WISENET XRN-1610

Бренды по названию

Популярные бренды

Hanwha Techwin WISENET XRN-1610, Руководство пользователя

Результаты поиска

Содержание WISENET XRN-1610

Отзывы:

Похожие инструкции для WISENET XRN-1610

Бренды по названию

Популярные бренды