M
`
If the new resolution does not fit the monitor, the output will not be displayed normally. In this case, wait until the monitor
returns to the default resolution and then change to a different resolution.
`
Set up Event Display and Sequence Switching Time in consideration of the network environment time.
`
The profile used for the live output on the extended monitor is "
Live4NVR
"". The highest resolution available is 1280 x 720.
If user changes the "
Live4NVR
" profile, the video display from the extended monitor may be affected."
`
The extended monitor's resolution can be set to 1920 x 1080 at the most.
`
If you enable the Clone mode for the monitors, you can use the maximum split mode supported by NVR. If you enable the
Extended mode for the monitors, you can use up to the 16-split mode for the secondary monitor. However, if you use
Extended mode for PRN-4011, then the primary monitor can cover up to 36-split mode and the secondary monitor up to
32-split mode.
to adjust the display position
Some monitors many not display information (camera name, icon, time information, etc.) about the NVR,
depending on the condition. Then, you can change the display position of the data.
1.
From the monitor setup menu, select <
display position Setup
>.
2.
Using the number button to adjust the screen that is cut off.
3.
Press <
ok
>.
M
`
The QRN-410, QRN-810, XRN-410S, XRN-810S, and XRN-811S products only support 4K resolution at 30 Hz.
text
Device and events can be set up.
device Settings
Relevant values of a device connected to NVR can be set.
menu > device > text > device
•
Device : Enter the user's desired name
•
Use : Select whether or not to use
•
CH : Select a channel to add a device from a channel table.
•
Port : Display a port number that is set
•
Encoding type : Select an encoding type to use from a list.
`
You can select starting and ending character strings.
-
A text string can be entered by using texts, hex codes, and regular expressions.
-
Text: Enter a text string to search for.
-
Hex Code: Enter a hexadecimal text string to search for.
(Your input should not be in hexadecimal—e.g. 1b40, 1b69)
-
Regular expression: Enter a regular expression to search for text strings that follow specific rules.
M
`
Epson, wincor, axihon, radiant system, IBM, and ANPR protocols are supported.
J
`
Equipment connected to NVR uses TCP/IP communication protocol.
English
_39
●
menu
Setup
