B. Regulatory and Safety
Phase One Disintegration Tester User Guide—40-108-001 Rev. A—14 November 2016
B-1
Regulatory Compliance
Hanson Research hereby certifies that this product, including
hardware and firmware, was designed, evaluated, validated,
inspected, and tested to approved specified quality
requirements of Hanson Research Corp. in conformance with
current USP, EP, JP, and other international standards (India &
Korea).
Canadian Emissions Notice
This digital apparatus does not exceed the Class A limits for
radio noise emissions from digital apparatus set forth in the
Radio Interference Regulations of the Canadian Department of
Communications.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux appareils
numériques de la classe A prescrites dans les réglements sur
le brouillage radioélectrique édictés par le Ministére des
Communications du Canada.
General Safety Considerations
This equipment contains moving parts, which have the
potential to pinch or jam.
The installation category (overvoltage category) for this
instrument is Level II. The Level II category pertains to
equipment that receives its electrical power from a local
source such as an electrical wall outlet.
This instrument must be connected to a grounded
electrical outlet.
Never work on the electrical components in the system
while there is power to the unit. DISCONNECT POWER
BEFORE SERVICING THE INSTRUMENT.
Review all safety and environmental precautions pertaining
to any chemicals that are to be used in conjunction with
this equipment.
