E. Disintegration Testing
Phase One Disintegration Tester User Guide—40-108-001 Rev. A—14 November 2016
E-5
With the hours highlighted, rotate the knob left or right until the
desired number is displayed. Press the knob to set the hours.
The screen will now highlight the minutes as shown below.
Rotate the knob until the desired number of minutes is
displayed. Press the knob to set the minutes. The screen will
now highlight the number of seconds as shown below.
Rotate the knob until the desired number of seconds is
displayed. Press the knob to set the seconds. The display will
now return to the RUN TEST screen, this time with the new test
duration value displayed.
If all other test preparations have been completed as described
earlier, simply press the control knob to start the timed test.
