3
1
、
SAFETY RULES
Safe ty Rule s
Please read the manual carefully before using the machine and
operating it correctly on this basis
This manual only for the installation, operation and maintenance
This operator should have received appropriate training
Please keep this manual or a copy to the welding machine operator
Installation, repair and maintenance personnel should also read the
operating instructions
Warning
Installation and maintenance of professional electrician to carry out
operations
Operation of electrical connections must disconnect the power
switch of the distribution box
Do not allow minors to close to the welding machine and welding
site
Note
The machine should be placed horizontal, the tilt angle should not
exceed 15°
Do not use this machine to thaw pipes.
An ele c tr ic sho ck ca n be fa ta l.
Be sure to turn off the power switch of the power distribution box
when wiring
Do not touch the exposed live parts
Do not touch the overheating parts produced by the current between
the welding and the workpiece with bare hands, or place parts of
body(or wet clothes)in the welding circuit to form a loop, when the
machine is working
Touching the electrodes of two power source at the same time may
cause electric shock damage
Do not loop any cables or other leads around your body or any parts of
your body
All cables and other leads must be firmly attached, undamaged,
properly insulated and adequately dimensioned. Immediately replace
any loose connections, scorched, damaged or under dimensioned
cables or other leads
In MIG/MAG welding, the welding wire, welding spool, the drive
rollers and all metal parts having a connection with the welding wire
are also live
The machine should be reliably grounded, and have the mains and the
machine supply leads checked regularly by a qualified electrician to
ensure that PE(protective earth)conductor is functioning correctly
Do not discharge the TIG torch when aiming at any part of the body
