Hanshen MP350 Series, Руководство по эксплуатации

Страница: 18 / 45

18
29
）
welding torch operation mode button
Select the welding torch operation mode
Table 4
：
welding torch operation mode
Mode Remark
Two steps Normal operation mode
Four steps Locked operation mode
Special four steps Up, crater arc adjustable
model
Spot welding Automatically control
working time
30
）
indicator light of welding method
When indicator light is on, it means the corresponding welding method is selected
31
）
selection button of welding method
Table 5
：
welding method
Welding methods Note
P-MIG Pulse welding
MIG/MAG Unified dc welding
STICK Manual welding
TIG Tungsten argon arc
welding
CAC-A Carbon arc air gouging
5.4 Implicit parameter adjustment
For implicit parameter adjustment method, see Fig5 and Fig6
At the same time press the store button (21) and the wire diameter selection key (23)
and then release, implicit parameter menu indicator (24) light is on, it means it has entered the
implicit parameter adjustment mode menu. Press the store button again (21) to exit the
implicit parameter menu adjustment mode; the implicit parameter menu indicator light is off.