22
3) Use knob (1) to select the storage location
or not to change the current storage
location.
4) Press the storage key (21), the left screen
shows ‘Pro’ meaning operation parameters are
being
stored
in
the
selected
storage location
Note: if the selected storage location already has
operation parameters, it will be covered by the
new parameters, the old parameters will not be
able to recover.
5) The left screen appears ".PrG, "meaning
successful storage.
At this time stored button (21) can be released.
6) Gently press storage key (21), exit the storage
condition.
Fig7
：
Storage program diagram
5.6.2 Invoking program
After storage, all operations can be used for next operation in invoking mode .To
invoke operations, please read the following steps, as shown in figure 8.
1
）
Gently press the invoking key (19), the
indicator light is on (20). The screen displays the
last working number. Use selection key
（
3
）
and
（
18
）
to look through its working procedure
parameters and also can check the operation model
and welding method
2) Use the knob (1) to select invoking number
assignment
