21
length correction
P13
Double pulse speed offset
0-2m
0.1m
2m
P14
Strong pulse group duty
ratio
10-90%
1%
50%
P15
Fixed frequency mode
OFF/U1
――
OFF
P16
fan control time
5-15min
1min
15min
P17
Arc starting slowly rise
time
0.1-10s
0.1s
OFF
P18
arc down time
0.1-10s
0.1s
OFF
Electrode manual welding method implicit parameter is as follows:
H01
Heat starting arc current
1-100
％
1
％
50
％
H02
Heat starting arc time
0.0-2.0s
0.1s
0.5s
H03
anti-sticking function
OFF/ON
――
ON
Note: press and hold the knob (1) for about 3 seconds, welding parameters will be
restored to factory settings.
5.6
Invoking mode
Whether in semi-automatic or fully automatic weld, ‘Invoking’ mode can improve the
quality of welding technology for both. This mode of operation has the memory function, it
can store and obtain as many as 100 different assignments. The following symbol will appear
in the operation mode, the screen on the left will display
：
-- indicates NO recording assignment (Only appears when invoking , otherwise will
display ‘nPG’).
nPG means no operating procedures
RPG means operating procedures stored
Pro means it is establishing procedures.
5.6.1 Stored procedures
Welding machine in factory has not stored procedures. before invoking procedures,
procedures must firstly be stored. Follow these steps
1) Set
‘
working
‘
program to store the parameter
of
each specification
2) Gently press storage (21), into the storage
system. Number of the work can be stored
