First use
page EN-18
2. Mark out the drill holes.
The upper drill hole must be at
least 145 cm above the ground;
the distance between the drill
holes should be 4.7 cm.
3. Drill holes at the marked points,
using a diameter that can ac-
commodate the wall plugs.
(15)
4. Place the wall plugs into the
holes.
5. Attach the wall bracket (15) to
the wall using the two screws.
Assembling the stand
bracket
(13)
(14)
• Insert the upper part of the stand
bracket (13) into the bottom part
of the stand bracket (14).
