The door hinges are on the right upon delivery.
As changing the door hinges requires some
manual skills, please read through the steps
of the procedure beforehand. To change the
door hinges, you will need the following tools:
– Phillips screwdriver
– Slot screwdriver
– 8 mm open-end or socket spanner
– 10 mm open-end or socket spanner
Detaching the appliance cover
and appliance door
1. Disconnect the mains plug from the socket.
(21)
(14)
2. Use a slot screwdriver to unscrew both
screws (21) on the reverse side of the ap-
pliance cover (14).
3. Take off the appliance cover (14) and, if
necessary, use a slot screwdriver to do so.
(22)
(14)
4. Disconnect the plug connector (22) be-
tween the appliance cover (14) and the
appliance.
Lay down or put the appliance cover (14)
in a safe place.
(24)
(25)
(23)
5. Unscrew the upper hinge plate’s (24) two
fixing screws (23) and the two individual
screws (25) on the opposite side. To do
this, use an 8 mm spanner or a Phillips
screwdriver.
6. Remove the upper hinge plate (24).
(3)
7. Lift the appliance door (3) up and take it
out.
8. Tip the appliance backwards (maximum
45°) so that you can also move the lower
hinge plate (26).
(26)
(9)
9. Turn both screw feet (9) outwards entirely.
10. Unscrew the lower hinge plate (26). To do
this, use an 8 mm spanner or a Phillips
screwdriver.
Changing the door hinges
Changing the door hinges
Page EN-24
