C
B
A
D
E
Space requirement according to appliance
dimensions
A:
54.5 cm
B:
115.7 cm
C:
108.7 cm
D:
≥
5.0 cm
E:
160°
– To prevent the formation of a flammable
gas-air mixture in the event of a leakage
in the refrigeration circuit, the installation
space must have a minimum size of 3 m³.
– The appliance must be set on a level and
firm surface only. The surface must be
strong enough to support the appliance’s
weight when fully laden.
– Suitable locations are dry, well-ventilated
areas that are cool if possible.
– Unsuitable locations are ones with direct
sunlight or which are directly next to an
oven, hob or radiator.
– The following minimum distances must be
maintained:
– to electric stoves
3 cm
– to oil and coal burning stoves
30 cm
– to other cooling appliances
2 cm
– to washing machines/
dishwashers
2 cm
– If you would like to reduce these distances,
you can fit an insulation plate between the
appliances.
– If underfloor heating is installed at the set-
up location, place the cooling appliance on
an insulation plate made from solid mate-
rial.
About climate categories
• Always ensure the prescribed ambient
temperature is maintained (see “Getting
started” on page EN-19).
Climate category means that the appliance is
intended for operation at the specified ambi-
ent temperature (see table “climate catego-
ries”). If the room temperature drops signif-
icantly below this, the unit will not switch on
as often. This indicates that an unwelcome
increase in temperature may occur.
“Climate categories” table
Zone description
Code Definition
Extended temperate zone
SN
This cooling appliance is designed for use at ambient
temperatures of +10 °C to +32 °C.
Temperate zone
N
This cooling appliance is designed for use at ambient
temperatures of +16 °C to +32 °C.
Subtropical zone
ST
This cooling appliance is designed for use at ambient
temperatures of +16 °C to +38 °C.
Tropical zone
T
This cooling appliance is designed for use at ambient
temperatures of +16 °C to +43 °C.
Getting started
Page EN-20
