Before starting to use the
appliance
• Read chapter “Getting started” from
page EN-19, in particular the safety instruc-
tions.
Unpacking and setup
WARNING
Risk of suffocation!
Children can become entangled in the
packaging fi lm or swallow small parts
and suffocate.
■
Do not allow children to play with the
packaging fi lm.
CAUTION
Risk of injury!
Improper handling of the appliance
may result in injury.
■
The appliance is heavy and bulky.
Seek the help of another person when
moving the appliance.
■
Drawers, doors etc. must not be used
as steps or for support purposes.
Dangers from the refrigerant!
■
Do not damage the refrigerant cir-
cuit, for example by piercing the re-
frigerant channels of the condensate
vaporiser with sharp objects, bending
the tubing, etc.
■
Refrigerant is fl ammable when spurt-
ing out and can damage the eyes. In
this case, rinse your eyes in clean wa-
ter and seek medical assistance im-
mediately.
■
To prevent the formation of a fl am-
mable gas-air mixture in the event
of a leakage in the refrigeration cir-
cuit, the installation space must have
a minimum size of 1 m
3
per 8 g of
refrigerant in compliance with the
EN 378 standard. The amount of re-
frigerant contained in your appliance
can be found in the data sheet at the
end of this user manual.
NOTICE
Risk of damage!
Improper handling of the appliance
may result in damage.
■
If possible, do not tilt the cooling ap-
pliance horizontally.
■
Do not use sharp or pointed objects
to unpack it.
■
When unpacking the appliance, nev-
er damage the insulation material on
the back of the appliance.
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature inside the appliance.
■
Always ensure the prescribed ambi-
ent temperature is maintained (see
“Getting started” on page EN-19).
1. Unpack the appliance and carefully re-
move all packaging, plastic profiles, adhe-
sive strips, protective film and foam pad-
ding from the inside, outside and reverse
of the appliance.
2. Select a suitable location and adhere to the
stipulated minimum distances and ambient
temperatures.
Getting started
Getting started
Page EN-19
