■
Inspections and repairs to the appli-
ance may only be carried out by au-
thorised specialists. If in doubt, con-
tact our Service department (see
page EN-29).
■
This appliance contains electrical and
mechanical parts which are essential
for protection against potential sourc-
es of danger. Only parts correspond-
ing to the original appliance specifi -
cations may be used for repairs.
■
In the event of a fault, as well as be-
fore extensive cleaning, pull out the
mains plug or isolate/unscrew the
fuse.
■
Do not put any objects in or through
the housing openings, and also en-
sure that children cannot insert any
objects into them.
■
Do not remove the covers from the
interior light. Do not attempt to re-
place the interior light. If in doubt,
contact our Service department (see
page EN-29).
■
Check the appliance regularly for
damage.
Fire hazard!
Improper handling of the appliance can
lead to fi re and damage to property.
■
Do not connect to a timer or a sepa-
rate remote-controlled system for dis-
tance monitoring and control.
■
Do not locate multiple portable sock-
et outlets or portable power supplies
at the rear of the appliance.
■
Do not connect to a multi-socket ex-
tension cable or a multi-socket plug.
Risks associated with using
refrigerants
WARNING
Risk of fi re and explosion!
Your appliance’s refrigeration circuit
contains the environmentally friendly,
but fl ammable and – as a mixture of air
and gas – explosive refrigerant R600a
(isobutane).
■
Do not use mechanical devices or oth-
er means to accelerate the defrost-
ing process, other than those recom-
mended by the manufacturer.
■
Mechanical intervention in the refrig-
eration system must only be carried
out by authorised specialists.
■
Do not damage the refrigerant cir-
cuit, e.g. by puncturing the refrigerant
channels of the condensate evapora-
tor with sharp objects, bending the
piping, or cutting open the insulation.
■
Ensure that none of the cooling fi ns
or tubes on a cooling appliance are
damaged prior to the point of proper
disposal.
■
To prevent the formation of a fl am-
mable gas-air mixture in the event
of a leakage in the refrigeration cir-
cuit, the installation space must have
a minimum size of 1 m
3
per 8 g of
refrigerant in compliance with the
EN 378 standard. The amount of re-
frigerant contained in your appliance
can be found on the type plate.
■
To avoid the formation of sparks, do
not pull out the mains plug in the
event of a gas leak.
Safety
Page EN-6
