Installation and connection
Page GB-33
Inserting the oven
NOTICE
Risk of damage!
■
Only lift the oven using the carrying
handles on the sides. The door is
not suitable for this purpose.
The following conditions must be ful
fi
lled:
– Size of built-in cabinet:
600 × 560 × 560 mm (H x W x D).
– The built-in cabinet can be equipped with
either ledges/rails or an intermediate shelf
with a ventilation cut-out.
– An intermediate shelf is required if a draw-
er is to be installed below the oven.
– Veneers, plastic coverings and adhesives
which are used must be resistant to heat
(100°C).
0
1
3
4
5
6
7
8
9
2
0
50
100
250
200
C
150
8.8.8.8.
:
OK
0
1
3
4
5
6
7
8
9
2
0
1
3
4
5
6
7
8
9
2
0
1
3
4
5
6
7
8
9
2
1. Use the carrying handles on the side of
the oven to lift it and then push it as far
back into the built-in cabinet so that the
connections and earthing screw for the
hob can be easily reached.
2. Insert the hob plugs into the sockets on
the top of the cooker. Do not use any
force. The plugs are coded. Polarity rever-
sal is therefore not possible.
3. Screw the terminal lug of the hob’s pro-
tective earth cable to the earthing screw
next to the terminal box.
4. Check all connections comply with
VDE 0701.
5. Evenly and completely push the oven
back into built-in cabinet.
The mains connection must not be
kinked, pinched or otherwise damaged.
0
1
3
4
5
6
7
8
9
2
0
50
100
250
200
C
150
8.8.8.8.
:
OK
0
1
3
4
5
6
7
8
9
2
0
1
3
4
5
6
7
8
9
2
0
1
3
4
5
6
7
8
9
2
6. Screw the oven to the built-in cabinet with
the four screws which have been sup-
plied.
