Seite EN-34
Care and maintenance
3. Remove filter (35) with the seal (36) from
the union nut (37) using tweezers or pliers
for example, rinse in clear water and, if
necessary, clean with a small, soft brush.
4. If necessary, replace the seal and filter if
they are defective.
5. Put the filter with seal back in and screw
intake hose back onto the tap.
6. Unscrew the intake hose from the appli-
ance.
(38)
(16)
7. Remove filter (38) from the connecting
piece of the water inlet (16) using twee-
zers or pliers for example, rinse in clear
water and, if necessary, clean with a
small, soft brush.
8. Put the filter back in and screw the inlet
hose back onto the connecting piece of
the water inlet.
9. To check, turn on the tap and check hose
and connections for leaks.
Cleaning the lint trap
WARNING!
Risk of scalding!
Improper handling of the appliance
can lead to scalding caused by hot suds.
■
Allow the washing water to cool be-
fore draining the remaining water
e.g. when emptying in the case of an
emergency.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
■
When draining in an emergency, sub-
stantial amounts of water may leak
out.
1. Switch off appliance and unplug the
mains plug.
2. Turn the tap off firmly.
(14)
3. Open the shutter of the lint trap (14) with
a flat object.
4. Place a flat container underneath the lint
trap.
