82
The operation of cab:
1.
Open left door with key, enter into cab.
2.
Close door, make sure left and right door close before working.
3.
The glass of left and right door can be moved by draw button on the glass.
4.
The rear door can be opened by loosing lock buckle.
Disassembling cab:
1.Stop the truck on solid and smooth level ground; close switch , pull down hand
brake.
2.Remove 4 bolts from left front and right front legs. To high position exhaust, the
fastening bolts should be removed
3.Pull out 4 rubber plugs from left rear and right rear legs, remove 4 bolts from left
rear and right rear legs.
4.Lift cab a little with crane.
5.Remove switch connection of fan, rain wiper, alarm light etc., remove wire from 4
support legs, and slip into support legs.
6.Put down cab slowly and lightly, avoid pressing wire and keep wire intact. .
Installing cab:
The installing procedure is opposite to removing procedure. But remove the bolts
which connect head frame and support legs, after fastening support legs and truck
body, then fastening connected bolts connected head frame and support legs, fastening
torque of bolts connected support legs and truck body :T=137~167 N·m. bolts for
connecting head frame and support legs:T=110~140 N·m
