2
choose the right tool and assembly method. Depress the noise and libration as
soon as possible to reduce the noise pollute to circumstance.
20.
The work road surface for forklift should be stability and unknit, cement,
blacktop or beton. If there are snows, ice, water or other eyewinker, bar.
Eliminate all, and then work. Otherwise the truck will be out of control and
lead the safety accident.
21.
Move the truck to the place which respects traffic when it anchors. If the reason
is brake or turn system, move it by a suitable truck (Reference the part of truck
move); Other reasons, use a suitable truck to traipse, tie the cord outside of
truck. Please abide by the traffic regulations when traipse the truck on calzada.
22.
After take-down the hood, water tank cover board, overhead, backrest of mast,
unallowed to operate the truck or load cargo.
23.
There are enough light at truck work ground. At night, open the head lamp to
collocate enough lamp-house.
24. Only in the event that the truck manufacturer is no longer in business and there
is no successor in the interest to the business, the user may arrange for a
modification or alteration to a powered industrial truck provided, however, that
the user shall:
a) Arrange for the modification or alteration to be designed, tested and
implemented by an engineer(s) expert in industrial trucks and their safety;
b) Maintain a permanent record of the design, test(s) and implementation of the
modification or alteration;
c) Approve and make appropriate changes to the capacity plate(s),decals, tags and
instruction handbook;
d) Affix a permanent and readily visible label to the truck stating the manner in
which the truck has been modified or altered together with the date of the
modification or alteration, and the name and address of the organisation that
accomplished the tasks.
