98
repair.
（
6
）
Check the drive of attachment timing or turn the component if fray or block,
change betimes.
（
7
）
Check each element if in normal under load attachment is work in gear. If
not, check the hydraulic pressure loop, find out the broken part, change air poof or
whole loop part.
2
、
Attachment assembly
！
Caution
1
、
Untempered technology licence of our company, any refit at safety and capability
to attachment is strict prohibit.
2
、
Fact rating load capacity should be the least of rating load capacity, the load
capacity of attachment, colligate load capacity of truck. Generally speaking, the
colligate load capacity of truck is the least. Attachment load capacity just a count
value of attachment pressure.
3
、
Assembly go to in reason, credibility, safety to avoid the attachment glide around
carriage in using.
4
、
After hang attachment, embed the rise catch block to the gap of top beam, let the
offset of centre line of attachment and carriage is less than 50mm.Otherwise,it will
be affect the landscape orientation stability of forklift.
5
、
To these attachment with rotating function, such as paper roll clamp, bale clamp,
muti-purpose clamp, drum clamp, it needs to weld chock block in the joint of carriage
beam and attachment to prevent move from side to side in the operation.
6
、
Assembly the attachment of below catch orientation, it need to adjust the clearance
between below catch and beam of carriage.
