Handsome Cycles Mud Butler Fender, Руководство по установке

Страница: 11 / 19

04
M o u n t t h e r e a r f e n d e r
t o y o u r b i k e f r a m e
20
Put (1) of
L
onto (1) of
M
. Then, mount the PVC coated bridge clip
O
to the seatstay bridge on your frame using a 4mm hex wrench. If your
bike uses caliper style brakes, you may remove your rear brake and then
use the post of the brake to mount the bridge clip. Make sure that the
bridge clip does not interfere with your brake. If possible, positioning
the bridge clip so that the tabs are not directly under the brake will help
when installing the fender.
21
If your bike has decent tire clearance and longer chainstays, you may
want to use the provided cork and longer bolt
P
, to space out your
fender at the chainstay bridge so that it sits closer to the tire (go to
step 22) . If your bike has tight clearance, you may not need to use the
cork spacer and will instead use (1) of
L
with (1) of
M
installed on it
(go to step 23).
L (6) SHORTER HEX
HEAD BOLTS
M (6) SMALLER
WASHERS
O (1) PVC
COATED
BRIDGE CLIP
P LONGER HEX
BOLT WITH
CORK