03
I n s t a l l t h e f r o n t
f e n d e r t o y o u r f o r k
If your bike has caliper style brakes, you will need to remove the
brake, and use the post of the brake to mount the front fender.
In this case, skip steps 9 & 11.
9
Decide which fork crown through bolt
H
or
K
will work best with your
fork. The bolt should go all of the way through with enough showing on
the back side to fully screw on the nut
J
. The bolt should not extend out
the back side so far that it touches the bike frame. If your fork crown
does not have a hole all of the way through, but has a threaded mounting
hole, you may need to use (1) of the shorter hex head bolts
L
and (1) of
the smaller washers
M
instead.
10
Position the front fender in the fork so that the shorter side faces forward
and the pre-installed tab on the fender is aligned with the hole in your
fork crown.
H
(1) STANDARD FORK
CROWN THROUGH
BOLT
50MM LONG
J
NUT
K
(1) LONGER FORK
CROWN THROUGH
BOLT
70MM LONG
L
(6) SHORTER HEX
HEAD BOLTS
M
(6) SMALLER
WASHERS
Содержание Mud Butler Fender
Страница 1: ...Mud Butler Fender installation guide...