Handsome Cycles Mud Butler Fender, Руководство по установке

Страница: 10 / 19

Always check your fenders for
deformation or loose bolts
.
Riding with loose or misadjusted fenders can
cause harm or serious injury.
17
With the fender centered over the tire and the proper gap all the way
around, tighten the bolts that you installed in step 14 with a 4mm hex
wrench. Make sure the fender is tight to the fork, that it is centered over
the tire, and that there is proper spacing.
18
If the struts stick out too far, you may need to cut down the strut with an
angle grinder or hacksaw. To make the cuts, you’ll need to mark the strut,
then remove the strut, make the cut, and then re-install.
DO NOT cut the strut too short!
19
Spin the front wheel. Make sure there is no rubbing and that the tire
clears under the fender easily. If there is any rubbing, loosen the bolts,
readjust, and retighten. Reattach your front brake and again make sure
that the wheel spins freely and that the brake pads hit the rim at the
same time on each side. If needed, readjust your brake.