Hands Free Farm RANGER, Руководство пользователя

Страница: 14 / 24

USING RANGER
HANDSFREEFARM.COM
12
Service Menu
To display the Service menu, press
Note: RANGER supports third-party applications designed to receive DGPS signals from an external receiver over
an RS-232 serial interface using NMEA 0183 messages. Various third-party connecting cables and kits are
available for such applications as yield monitors, rate controllers, and laptops. Make sure RANGER and the
external application use the same baud rate. When using an output rate of 5 HZ use a higher baud rate (such as
19200) than the default (4800).
Menu Item Default Description
Correction
Type Options: SBAS, e-Dif
Default: SBAS Differential correction type used by RANGER to
improve GPS positioning accuracy.
• SBAS (default) is available throughout most
of North America and does not require any
configuration.
• e-Dif is most relevant outside North America
and is intended only for relative guidance
applications and is not recommended for
data recording and subsequent comparative
analysis.
It is recommended that North America customers
use the default (SBAS).
SBAS Satellite Options: AUTO, W122, W134, W135,
W138, E120, E124, E126, E131,
M129, M137
Default: AUTO Menu item appears only when correction type is
SBAS. If not using AUTO (default), for North
America SBAS coverage use a WAAS satellite
(W122, W134, W135, or W138).
NMEA Port
Setup
(see Note
below table)
Options (defaults in bold):
NMEA Port Baud: 19200, 9600, 4800
GGA: OFF,.2 HZ, 1 HZ , 5 HZ
GLL: OFF ,.2 HZ, 1 HZ, 5 HZ
VTG: OFF,.2 HZ, 1 HZ , 5 HZ
RMC: OFF ,.2 HZ, 1 HZ, 5 HZ
GSA: OFF ,.2 HZ, 1 HZ, 5 HZ
ZDA: OFF ,.2 HZ, 1 HZ, 5 HZ
Baud rate and GPS message output rates used by
RANGER when
• NMEA Port Baud:
• Messages (GGA through ZDA): Set the
frequency of message data. For example,
set GGA to 5 Hz to transmit GGA message
data five times per second (once every 0.2
seconds).
Unit of
Measure Options: Feet, Meters
Default: Feet Unit of measure used throughout the display.
Language Options: Multiple languages
supported.
Default: English Language used throughout the display. Language
options vary depending on the language group
installed RANGER. Contact Outback Guidance
Customer Service for questions regarding
language groups.
Reset Defaults N/A Reset factory defaults.
Service Menu
Correction Type SBAS
SBAS Satellite AUTO
NMEA Port Setup >
Unit of Measure Feet
Language English
Reset Defaults >
until Service
is selected