Hands Free Farm RANGER, Руководство пользователя

Страница: 8 / 24

INSTALLING RANGER
HANDSFREEFARM.COM
6
Mounting the Console
Before mounting the console, determine an appropriate mounting location. Typically, you mount the console above
and behind the center of the steering wheel just below your line of sight. The simplest installation is on the front
glass of the cab, but you can vacuum mount the console to any non-porous (metal) surface.
To mount the console:
1. Using the four machine screws, attach the RAM ball mount securely
to the back of the RANGER console.
2. Using the two self-tapping screws, install the RAM pedestal to the
vacuum cup. Tighten the screws securely.
3. Attach the RAM pedestal to the RAM ball on the back of the
RANGER console.
4. Thoroughly clean the inside cab window surface directly in front of
the steering wheel.
5. Press the vacuum mount to the window and twist the actuator until it
clicks over center to create adhesion to the glass.
6. Loosen the RAM mount and adjust the console to the proper
viewing angle.
Do not mount the console in a location where it interferes with seeing other information, controls,
or the field. Looking at the screen for too long while operating the vehicle can cause a crash.
Do not leave the console unattended for extended periods of time. If possible, remove the
console from the glass when it is not in use. Continued exposure to the elements (such as direct
sunlight) may damage the suction cup. To extend the life of the suction cup clean it periodically
per manufacturer’s instructions.
WARNING:
!
Twist
actuator
CAUTION
!