manualshive.com logo in svg

HandHeld Dolphin 9500 Series, Руководство пользователя

Поделиться
Скачать
HandHeld Dolphin 9500 Series Скачать руководство пользователя страница 230

13 - 6

Rev C

 Dolphin® 9500 Series User’s Guide

Spring Arm Assembly

The spring arm assembly is the column that connects the latch to the back of the Mobile Base.

Ball Joints

There are two ball joints: one on the back of the Mobile Base and one on the mounting bracket. Both ball joints are 
inserted into the bracket and secured to mount the Mobile Base.

Connectors

The power and RS-232 connectors are located on the bottom panel. For more information, see 

Bottom Panel

 on 

page 

13-3.

Brackets

Bracket

The bracket contains the turnscrew and two slots. Ball joints are inserted into each slot and secured with the 
turnscrew.

Turnscrew

The turnscrew is located on the top of the bracket. Rotate the turnscrew to secure or loosen the ball joint slots.

Mounting Bracket

The mounting bracket is what you attach to the mounting surface. It is comprised of a ball joint and flat disk. The 
disk contains drill holes you use to secure the Mobile Base to the mounting surface.

Powering the Dolphin Mobile Base

Note: Hand Held Products recommends that you leave the Mobile Base connected to its power source at all times. 

The Mobile Base is powered via the power connector on the bottom panel; see 

Bottom Panel

 on page 

13-3.

 Both the power and 

serial connectors are straight out, not at an angle. The Mobile Base must be powered by a 12 to 48 volt DC source. 

Содержание Dolphin 9500 Series









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды