background image

Dolphin® 9500 Series User’s Guide 

Rev C

10 - 9

POP3

If you use POP3 and you move e-mail messages to a folder you created, the link is broken between the messages on the terminal 
and their copies on the mail server. The next time you connect, the mail server will see that the messages are missing from the 
terminal Inbox and delete them from the server. This prevents you from having duplicate copies of a message, but it also means 
that you will no longer have access to messages that you move to folders created from anywhere except the terminal. 

IMAP4

If you use IMAP4, the folders you create and the e-mail messages you move are mirrored on the server. Therefore, messages 
are available to you anytime you connect to your mail server, whether it is from the terminal or desktop computer. This 
synchronization of folders occurs whenever you connect to your mail server, create new folders, or rename/delete folders when 
connected. 

Pocket Internet Explorer 

Use Microsoft Pocket Internet Explorer to view Web or WAP pages in either of these ways:

During synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the 
Mobile Favorites subfolder in Internet Explorer on the desktop computer.

Connect to an ISP or network and browse the Web. 

When connected to an ISP or network, you can also download files and programs from the Internet or intranet.

Accessing Pocket Internet Explorer

To switch to Pocket Internet Explorer, tap 

Start

 and then Internet Explorer.

You can use Pocket Internet Explorer to browse Mobile Favorites and channels that have been downloaded without connecting 
to the Internet. You can also connect to the Internet through an ISP or a network connection and browse the Web.

Browse the Internet on Your Terminal

You must set up a connection to your ISP or corporate network using Connections before browsing; see 

Using an ISP

 on page 

6-8.

 If you select Pocket Internet Explorer before setting up the network connections, a screen may appear allowing you to 

proceed to the connection settings screen. 

After you select the settings, return to Pocket Internet Explorer. 

1. Open Internet Explorer (

Start

 > 

Internet

 

Explorer

).

2. To connect and start browsing, tap 

View

 and then 

Address Bar

3. In the address bar that appears at the top of the screen, enter the Web address you want to visit and then tap 

Go

4. Tap the arrow to choose from previously entered addresses.

If Mobile Favorites have been set up, you can tap one of them to start browsing. See 

The Mobile Favorites Folder

 on page 

10-10.

 

To add a favorite link while browsing, navigate to the page you want to add, tap and hold on the page, and tap 

Add to Favorites 

on the pop-up menu.

Содержание Dolphin 9500 Series









































































































































































































































































Отзывы: