manualshive.com logo in svg

HandHeld Dolphin 9500 Series, Руководство пользователя

Поделиться
Скачать
HandHeld Dolphin 9500 Series Скачать руководство пользователя страница 147

Dolphin® 9500 Series User’s Guide 

Rev C

8 - 11

OBEX

This section explains how to use the OBEX (object exchange) application to trade business cards, contacts or files with another 
Bluetooth device that supports OBEX.

Bluetooth OBEX application supports five operations:

•

Exchange Business Cards

•

Send a Contact

•

Send a File

•

Browse Remote Device

•

Receive Contact or File

•

Enable File Sharing

The first four operations - exchange business cards, send a contact, send a file, and browse remote device - are client-oriented. 
They involve initiating an object exchange.

The last two operations - receive contact or file and enable file sharing - are server-oriented. They involve accepting objects in 
an exchange initiated by another Bluetooth device.

Exchange Business Cards

1. Make sure both Bluetooth devices have a business card assigned to them.

If each device does not have a business card assigned to it, you cannot exchange business cards.

To assign a business card to your device, do the following:

•

Tap on the 

Bluetooth

 icon. In the pop-up menu, tap 

Advanced Features

 > 

My Bluetooth Device

.

•

Tap on the 

Object Sharing

 tab. Under My business card, tap 

Assign

•

In the next screen, select your business card and tap 

OK

. If your business card is not listed, tap 

Contacts

 to create one.

When you return to the Object Sharing screen, tap 

OK

.

2. Make sure the other Bluetooth device is set up to receive a contact. The device must support the OBEX Object Push profile.

Note: If the other device is also using the Bluetooth Connection Kit, you can set it up to receive a contact by tapping the Bluetooth 

icon. In the pop-up menu, tap Transfer via Bluetooth > Receive Contact or File.

Содержание Dolphin 9500 Series









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды