Dolphin Multiple Battery Charger User’s Guide
Page 2
Chapter 2
Getting Started
Setting Up The Dolphin Multiple Battery Charger
The Dolphin Multiple Battery Charger should be setup on any dry, stable surface.
You must connect the Dolphin Multiple Battery Charger to a power source for any type of operation.
HHP recommends that you leave the Dolphin Multiple Battery Charger connected to its power source at all times, so
that it is always ready to use.
Supplying Power To The Dolphin Multiple Battery Charger
Locate the AC power cord that came with your Dolphin Multiple Battery Charger. Plug the power cord into the
Dolphin Multiple Battery Charger Universal wide input voltage AC input, then plug the power cord into a wall
socket.
Depress the GREEN Power Switch located in the bottom left-hand corner of the top panel. The GREEN power LED
will illuminate and the charger will undergo a self diagnostic test.
CAUTION: Using a non-HHP power cord will void your warranty and can result in serious damage to the Dolphin
Multiple Battery Charger circuitry.