Dolphin Multiple Battery Charger User’s Guide
Page 7
Chapter 4
Troubleshooting
If you encounter problems with your Dolphin Multiple Battery Charger, first, please go through the list of problems
and solutions in this chapter. If problem persist, please contact Hand Held Products Technical Support.
Problem
Issue
The ‘CHARGING” LED does
not come on when I insert a
battery pack into the Dolphin
Multiple Battery Charger
Check the power connections
on the Dolphin Multiple
Battery Charger. Also check to
ensure the POWER switch is
ON and the battery pack is
properly seated.
The RED status “ERROR”
LED comes ON during
charging.
Attempt to charge the battery in
another pocket location. If the
RED “ERROR” LED follows
the battery, then the problem is
associated with the battery
pack. If the RED “ERROR”
LED stays with the pocket then
the problem is associated with
the charging circuitry.
The RED “ERROR” LED
remains ON, without a battery
in the charging pocket.
An error occurred during the
self diagnostic test for that
particular pocket location.
Refer problem to Hand Held
Products Technical Support.