48
Effects
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
}27 VIBRATO
SPEED NORMAL
}30 REVERB2
LEVEL 0
Ë
Reverb Level
This Advanced Feature allows you to set the numeric level of the Reverb. You can select from “0" to “15.”
TRY THIS:
1.
Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2.
Touch the PERC./ANIMATION Select Touch Button two times. The Information Center Display
should look like this:
3.
Touch the PAGE “
<
” Select Touch Button three times. The Information Center Display should look like
this:
4.
Now select the option you wish by doing the following:
Use the REVERB Rotary Control to make your numeric setting, or:
Use the VALUE "
>
" Select Touch Button to scroll up through the numbers.
Use the VALUE "
?
" Select Touch Button to scroll down through the numbers.
This data CAN be stored to a Preset. To see a total listing of all Preset Parameters, see the Preset Parameter List.
NOTE:
You can exit by touching the EDIT Select Touch Button.
Overdrive
Overdrive adds the fuzzy, raspy, "dirty" sound created by the vacuum tubes of a tube-style Leslie Speaker when its volume is
pushed past its sound limit. This Advanced Feature allows you to adjust the amount of Overdrive that you prefer.
Located to the right of the REVERB Rotary Control is the OVERDRIVE Rotary Control. This
Rotary Control allows you to control the total or maximum volume of Overdrive. Turn this control
to the right to increase the amount of Overdrive, and to the left to decrease the amount of Overdrive.
