99
Special Utility Features
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
`1 MEMORY DUMP1
ALL DATA OUT
SPECIAL UTILITY FEATURES
Memory Dump - All Data
This Advanced Feature allows you to save and retrieve the XK-2's Preset, Global and Leslie Parameters to and from a MIDI
Data recorder.
TRY THIS:
1.
Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2.
Touch the SYSTEM Select Touch Button three times. The Information Center Display should look like
this:
3.
Make sure that the XK-2 is connected to a MIDI Data recorder before you send or receive MIDI data,
then do the following:
Sending Data Out -
Make sure that the MIDI recorder is ready to receive data (RECORD). Touch the
VALUE "
>
" Select Touch Button, then touch it again to start the data dump to the
MIDI Data recorder. The Information Center Display will show, "Transmitting....”
When all information has been sent, the Information Center Display will flash, "Data
completed!.”
Receive Data In - Touch the PAGE "
<
" Select Touch Button once. Make sure that the word "ON" appears to the
right of the word "RECEIVE" in the Information Center Display. If "OFF" is displayed, Touch
either the VALUE "
>
" or the VALUE "
?
" Select Touch Button to change the word "OFF" to
"ON.” This will turn Receive Mode "ON,” allowing the XK-2 to receive incoming data. Start
the MIDI recorder. When all information has been received, the PLAY Screen will return.
NOTE:
If you attempt a Data Dump to the XK-2 when "OFF" is displayed, the Information Center Display will flash, "Data
Protect !" This ensures that you do not accidentally overwrite data.
NOTE:
You can exit by touching the EDIT Select Touch Button.
