96
Special Advanced Features
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
{1 MASTER TUNE
440Hz
{7 FOOT SW.1
SELECT LES S/F
Foot Switch Function
This Advanced Feature allows you to select different functions for the Foot Switch. You can select from:
“OFF” - Disables the foot switch, allowing it to be used strictly for sending MIDI Controller #64 (Sustain).
“LES S/F” - Use for turning the Leslie rotor(s) “SLOW” or “FAST.”
“UM DAMPER” - Allows Upper Manual Drawbar tones to be "damped" or sustained.
“LM DAMPER” - Allows Lower Manual Drawbar tones to be "damped" or sustained.
“PRESET FW” - Allows you to change Presets. Each time the Foot Switch is pressed the next Preset number in sequence
will be selected.
TRY THIS:
1.
Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2.
Touch the SYSTEM Select Touch Button once. The Information Center Display should look like this:
3.
Touch the PAGE “
<
” Select Touch Button six times. The Information Center Display should look like
this:
4.
Now select the option you wish by doing the following:
Use the VALUE "
>
" Select Touch Button to scroll up through the options.
Use the VALUE "
?
" Select Touch Button to scroll down through the options.
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE:
You can exit by touching the EDIT Select Touch Button.
